Turn most pre-existing featureless tanks into a 600 watt ultrasonic cleaner with the Sonicor 604P immersible transducer. You can customize your new ultrasonic tank with additional transducers as your cleaning needs change.
Product Information
Sonicor immersibles are used for introducing ultrasonic energy where the use of transducerized tanks is not practical. Immersibles are stainless steel enclosures containing lead-zirconate-titanate composite transducers and are powered by Sonicor “SG” Ultrasonic Generators.
Sonicor Immersible transducers are offered in a variety of mounting configurations to address both new equipment and retrofits into existing process tanks:
- IB – Bulkhead Mounting fitting(s) with an 8 foot coaxial RF cable/connector assembly protrude from the immersible and pass directly through the bottom or sidewall of tank, The coaxial connector(s) correspond to the output connector(s) on the ultrasonic generator.
- IS – IS series immersible transducers are provided complete with a 4 foot stainless steel/teflon hose to route the transducer RF cable safely above the liquid level of the tank. An 8-foot RF cable with the appropriate generator connector protrudes from the end of the stainless steel/Teflon hose, to complete the connection from the immersible transducer to the ultrasonic generator.
- IR – IR series immersible transducers are provided with an 18” rigid stainless steel pipe assembly to route the transducer RF cable safely above the liquid level of the tank. An 8-foot RF cable with the appropriate generator connector is provided to complete the connection from the immersible transducer, to the ultrasonic generator.
